Frigmaires International Mumbai, Maharashtra

Send SMS
Contact Us

Grease Plant

Grease Making Plant

Approx. Rs 15 Lakh / Unit


Grease is o fine dispersion of on oil-insoluble thickening agent- usually soap in o fluid lubricant which is generally mineral lubricating oil. The soap is mode up of fatty acid, tallow or vegetable oil saponified with alkali which can be hydrated lime, caustic soda, lithium hydroxide or aluminum hydroxide. The lubricating oil component is refined base oil• naphthenic, of medium viscosity index, or cylinder oil stock. Structurally grease is a "water-in-oil" emulsion. Its appearance is smooth, mostly translucent, soft or hord.

Grease manufacturing procedure
Grease manufacturing can be described as an art as well as science. It is akin to cooking food In spite of detailed recipes the cooks personal attention and supervision at critical storage only can give best results

Manufacturing of Greases
The manufacture of Greases therefore involves the following steps, some of which may be accomplished simultaneously.


Additional Information:

Grease Pilot Plant

Grease Pilot Plant
  • Grease Pilot Plant
  • Grease Pilot Plant
  • Grease Pilot Plant

Approx. Rs 19 Lakh / Unit


Frigmaires offer Pilot skid mounted grease plant complete with the training / know how / formulations to make calcium / lithium / soda / high temperature grease.

Additional Information:

Lab Grease Plant

Lab Grease Plant
  • Lab Grease Plant
  • Lab Grease Plant

Approx. Rs 25 Lakh / Unit


The Kettle is fabricated out of graded quality steel and fitted with a jacket for heating & cooling complete with Inlet, outlet and drain fittings. Temp gauges are provided on the Kettle for monitoring the temp of the grease at different stages of the manufacturing process. The bottom is dished type and fitted with a flush bottom discharge valve and one drain valve ball type for sample removing, testing and checking. The agitator assembly consists of a duplex designed system where shafts fitted with agitators thoroughly blend the grease as well as move the entire mass. Scrapers are provided at the sides and bottom of the agitator assembly.
The drive consists of a 3 HP 3ph 415V electric motor coupled to a heavy duty gear box by couplings. The output shaft of the gearbox is coupled to a stool housing complete with bearings, oil seals and gland packing's. The entire drive assembly is mounted on a sturdy frame structure. The top cover is dished and flanged to the shell. The kettle is suitable for withstanding a working pressure of 4 Bar and temperature of 300°C. A bolted hinged type cover to facilitate charging of solids is provided along with 2 nos flanges for charging of base oils and additives. A pressure gauge,temp gauge and safety valve is provided on the top cover for monitoring process parameters. The Kettle is duly insulated with rock wool and cladded with GI sheets.

Additional Information:

Pilot Model Grease Plant

Pilot Model Grease Plant
  • Pilot Model Grease Plant
  • Pilot Model Grease Plant

Approx. Rs 12.75 Lakh / Unit


Frigmaires offer Pilot skid mounted grease plant complete with the training / know how / formulations to make calcium / lithium / soda / high temperature grease.

Additional Information:

Grease Plant

Approx. Rs 3.75 Lakh / Unit


GREASE MANUFACTURING PROJECT.

The project/plant offered by us is the outcome of many years of technical and scientific experience.

Modern manufacturing equipment, scientifically developed formulations, the processes, careful supervision at every stage, vast manufacturing, fabrication and design experience are put together to create the project.

Accurate process controls, high manufacturing standards, quality controls, repeatable and reproducible conversion efficiency incorporated in the plant ensure very high manufacturing standards resulting in production of complete range of greases of proven qualities.


Additional Information:

Grease Kettle

Grease Kettle

Approx. Rs 5 Lakh / Unit


Frigmaires Grease cooling Kettle complete with specially designed Agitator and cover to work under pressure

Additional Information:

Grease Milling Machine

Grease Milling Machine

Approx. Rs 2.75 Lakh / Unit


Frigmaires offers 3 stage rotor and stator grease milling machine suitable to grind lithium / calcium / soda / aluminum based grease. Capacity range from 200 ltrs / hr to 5000 Ltrs per hour. The grease miller is also used for grinding of bitumen emulsion. The grease miller is complete with pumps / de aerator panel all mounted in a single skid making the machine compact and easy to operate.

Additional Information:

Grease Milling Plant

Grease Milling Plant
  • Grease Milling Plant
  • Grease Milling Plant

Approx. Rs 5 Lakh / Unit


Grease is o fine dispersion of on oil-insoluble thickening agent- usually soap in o fluid lubricant which is generally mineral lubricating oil. The soap is mode up of fatty acid, tallow or vegetable oil saponified with alkali which can be hydrated lime, caustic soda, lithium hydroxide or aluminum hydroxide. The lubricating oil component is refined base oil naphthenic, of medium viscosity index, or cylinder oil stock. Structurally grease is a "water-in-oil" emulsion. Its appearance is smooth, mostly translucent, soft or hord.

Grease manufacturing procedure
Grease manufacturing can be described as an art as well as science. It is akin to cooking food In spite of detailed recipes the cooks personal attention and supervision at critical stoges only can give best results

Manufacturing of Greases
The manufacture of Greases therefore involves the following steps, some of which may be accomplished simultaneously.


The operations ore carried out in vessel known os Grease Kettle, which is equipped with some form of agitation and with heating facility. The rate of cooling is very important in the development of the proper structure for many types of Grease, hence, close temperature control is required to manufacture a grease of desired properties. The structure of the greose can be modified by milling which can be carried out in the kettle itself during the cooling period or may be done outside the kettle. For out side milling, a high shear Homogenizer or Colloid mill is normally used. Depending upon the types of grease, the total time required for manufacture of a grease batch in a kettle varies from 1 0 / 20 hours.

Additional Information:
X
Provide Us More Details
Purpose of Requirement:

Reselling End Use Raw Material

X

Looking for Grease Plant ?

    country-ico

    We will contact you soon !

    H. Advani

    (CEO)

    Frigmaires International

    Lower Parel, Mumbai, Maharashtra, India

    More Categories

    View All Categories »
    Send SMS
    Contact Us